SunterHonda - Price List

Description	Price	Image	Notes
Mikuni Bell mouths	£64.00		Increase the power of your K4 using Sunter honda bell mouths. Fit straight onto 32mm Mikuni carbs. (other sizes catered for) They can of course be used, on single cylinders, using one carb!
Front Fairing Probe - stage 1	£42.00		Front fairing probe, with weld-ons. Lugs for mounting rev counter bracket, Fork lock stops with nylon ends!
Front Fairing Probe - stage 2	£53.00		Front fairing probe, with weld-ons. Lugs for mounting rev counter bracket, Fork lock stops with nylon ends! Front alloy extension, with front locking washer
Front Fairing Probe - stage 3	£77.00		Front fairing probe, with weld-ons. Lugs for mounting rev counter bracket, Fork lock stops with nylon ends! Front alloy extension, with front locking washer and rev counter bracket
Front Fairing Probe - stage 4	£134.00		Front fairing probe, with weld-ons. Lugs for mounting rev counter bracket, Fork lock stops with nylon ends! Front alloy extension, with front locking washer and rev counter bracket, top fairing mounting frame, shown attached to probe and extension. Designed and tested, for rigidity and strength, when used with one of my fairings, with the lightweight collar, inside the screen
Probe mounted, top fairing frame	£57.00		Designed to be used with, the SUNTER HONDA fairing, but may be used in other applications. Ridged lightweight, frame with all outside fittings
Alloy Rev Counter Bracket	£25.00
Rear top Fairing mount	£42.00		Will fit standard k4 frame. All in 6082 alloy, cross bar, 2 tapered outside washers, and countersunk bolts, screwed into short extensions, that stay attached to fairing. 2 R clips for quick release. Fully adjustable to suit your fairing
Fairing belly pan mounting	£27.00		Fits standard k4 frames, when using a SUNTER HONDA fairing, fully adjustable, rigidly fixes the rear belly pan in position
Frame	£1050.00		Comes with rear-set's. Will part ex on a decent standard straight frame
DM Rear Shocks	£349.00		Well I guess you've tried the rest, so now its time to buy the BEST rear shocks on the market ! Rebound + Compression + Height adjustable and only 1kg each. Most fittings catered for. They will transform your Bike ! As used by many top Classic Racers. Now available from Sunter Honda.
Swing arm	£275.00		Comes with fitted sharks fin & nylatron chain runner
Swing arm bushes	£38.50		Replacement swing arm steel bushes, FOR standard swing arm. Made from EN36, hardened and ground to size. Price includes UK Package & Postage
Fairing	£150.00		A light weight, aerodynamic, strong dynemer 2 piece fairing . 6 months in Design, mould construction, and testing. Uses, the popular and easily available TZ screen. Discrete curves, for engine cooling, Built in , hand blisters, for undisturbed flow. And full belly pan, to create, the appealing smooth classic appearance.
Alloy Sharks Fin	£22.00		Essential Guard
Disc Carrier spacers	£27.50		Hub mounting hole P.C.D. must be specified
Rear hub sprocket spacers	£7.00		Spacer to take up width gap, when alloy race sprocket fitted
Seat with race foam padding	£65.00
Rear Splash guard	£35.00		Fits standard K4 and Drixton frames
Fuel Tank	£320.00		Dynemer and Kevlar construction for high impact crash strength. Rubber mountings front and rear. Screw filler cap. High flow fuel tap. Top quality fuel resistant painted finish with honda Decals under the final lacquer coat. Any colour of your choice !
Front mudguard	£38.00
Solid billet top and bottom yoke, with alloy stem in 6082 alloy	£350.00		If taper roller bearings required, add £40.00
Clutch worm drive	£75.00		Replace your unreliable, clutch lifter, with a worm drive! Fitted to, 250 and 350cc covers ! Once fitted , just forget it.
Retainer	£12.00		Stop that clutch seal popping out!
Alloy billet clip-ons (33,34 & 35mm )	£86.00		6082 alloy with nylon end crash bungs!
Alloy top engine mounts, with vibracoustic bushes	£82.00
Oil Fiter Block	£112.50		Throw away your POWER sapping,sludge trap and replace with the Sunter honda oil filter block , "FREE FITTING" if you send me your 250 or 350cc clutch cover ! You only pay the postage ! Or if you would prefer, fit it yourself using the gasket as the template to drill one small hole into the oil way ! External appearance complies with the classic club rules !
Standard Lockheed Calliper bracket	£38.50		Fits 33mm or 35mm forks. Different disc diameters catered for. One off specials POA
Fork Leg machined to accept bracket	£50.00
Deluxe Lockheed Calliper bracket	£55.00		Fits 33mm or 35mm forks. Different disc diameters catered for. One off specials POA
Lightweight P.V.L. Ignition cover	£108.50
Foot pegs	£25.00		A pair of made to measure foot pegs with an M8 or M10 thread and a standard length of 80mm Other lengths available at no extra charge
Replacement toe pegs	£14.00 per pair		Smooth gear change peg, so no damage to race boots and knurled rear brake peg
Rear Sets	£165.00 per pair		Rear sets for standard K4 frames. Aircraft spec 6082 alloy, smooth gear change toe peg, to save those race boots. State shoe size when ordering. 3 different lenghts of pedal . Consists: Hangers with weld on lugs, Pedals, with none seize swivels, Toe and foot pegs. Includes all fixing bolts.
Rear set for cable use	£115.00		6082 Alloy hanger, pedal, toe and foot rest. Cranked pedal, with cam adjuster, for height adjustment. Comes with weld on mountings !
Gear change rear set	£104.00		6082 Alloy Hanger, pedal, toe and foot rest. Cranked pedal. Comes with weld on mountings. Gear change rod and ball joints not included.
Rear set for brake rod use	£115.00		6082 Alloy hanger, pedal, toe and foot rest. Cranked pedal, with height adjustment. Comes with weld on mounts. Rod and ball joints not included.
New none flex, Rear Brake Rod	£38.50		Using suspension bridge technology, for complete ridgid none flex, smooth rear brake, action. No sticking. No poor complicated cable run to cope with. Great mod to use with sunter honda rear sets
Gear change rod, with two, 6mm rose joints	£23.00		Made to measure gear change rod. Centre diameter is tapered to each end to decrease lateral flex. Supplied with two 6mm rose joints. Please specify length as centres of rose joints.
Torque arm with two 8mm rose joints	£27.00		Made to measure torque arm. High grade, 6082 lightweight alloy tube with two 8mm rose joints. Please specify length as centre of rose joints.
Rose Joints: 6mm male 8mm male 8mm female	£5.30each £7.85each £6.85each		Quality rose joints